What Are Crucible Tongs?
Crucible tongs are the all-metal tongs used to lift a hot crucible in and out of a furnace or off a clay triangle. They are un-coated. This page covers what crucible tongs are used for, how they differ from beaker tongs, which of our three models suits which heat source, and how to handle a hot crucible with them.
What Are Crucible Tongs Used For?
Crucible tongs let you grip and move a small, very hot vessel without touching it. In practice that means:
- Lifting a crucible in and out of a furnace or a laboratory oven.
- Lifting a crucible off a clay triangle after it has been heated over a burner.
- Lifting and replacing a crucible cover while the crucible is hot.
- Removing sterilized instruments from an autoclave, a common use for the stainless steel model.
Crucible Tongs vs Beaker Tongs
The primary difference between the two is grip. Beaker tongs have plastisol coated jaws shaped to the curve of a beaker wall, so a hot beaker does not slip out from between them. Crucible tongs are bare metal, and metal on glass slips. Do not use crucible tongs to carry a beaker.
The reverse matters just as much. The plastisol coating on beaker tongs melts between 320 and 350 degrees F, so a crucible straight out of a furnace will destroy it. Beaker tongs are for beakers, and ours fit 50 to 1500 mL. Crucible tongs are for crucibles.
Which Crucible Tongs Do You Need?
We carry three, and they are not interchangeable. The choice comes down to the heat source and how far your hand needs to be from it.
- Crucible Tongs 10": nickel plated steel, ten inches long. Suited to open flame heating and shallow ovens.
- Crucible Tongs 10" Stainless Steel: surgical grade stainless steel with serrated jaws for a better grip. Suited to open flame heating and shallow ovens, and it can be autoclaved.
- Julian Style Crucible Tongs: 22 inches of nickel plated heavy gauge steel wire, with curved ends and a compressing guide. Better adapted to deep ovens and muffle furnaces.
How to Handle a Hot Crucible With Tongs
- Before you light the burner, nudge the crucible gently with the tongs, not a finger, to confirm it is seated and stable.
- Grip the crucible by its sides, never by the rim.
- Never set a hot crucible on a cold bench top. Let it cool on the triangle or the ring stand first.
- Keep the tips of the tongs clean and dry. Anything on the tips transfers to the crucible, which matters in gravimetric work where the crucible itself is weighed.
- Do not use plastisol coated beaker tongs on a hot crucible, and do not use crucible tongs on glass.
Shop Crucible Tongs
Avogadro's Lab Supply stocks the tools described on this page:
- Crucible Tongs 10", the standard nickel plated pair.
- Crucible Tongs 10" Stainless Steel, surgical grade and autoclavable.
- Julian Style Crucible Tongs, 22 inches for deep ovens and furnaces.
- All lab tongs, including beaker tongs, flask tongs and evaporation dish tongs.
- Crucibles, crucible covers and clay triangles.
More reference material is in our Lab Reference Guides.